Update BIOS W500 series tablet
- Acer Updates EC version in BIOS. version 1.14 (3.8 MB )
- Acer Supports Ericsson F3307 3G Card. 1.13 (3.8 MB )
- Acer Fixes that system immediately resumes while it connects to 3G network and enter Sleep Mode (S3). 1.10 (4.4 MB)
- Acer Fixes battery information reported might be incorrect if battery is in Shut Down mode. 1.08 (4.4 MB )
- Acer BIOS 1.05 (4.8 MB)
- Acer Firmware (Touch Panel Firmware Updater) 1007.2005 (1022.8 KB )
Instructions
- Write down your existing BIOS settings so you can restore them after you’ve flashed the new BIOS firmware.
- Determine the correct BIOS firmware that you need for your computer. Check your computer manufacturer’s website for this information. If you have a custom-built system, check the motherboard manufacturer’s website for the latest BIOS firmware.
- Download the latest BIOS firmware specific to your computer.
- Run the installer or executable file that you downloaded.
- Turn off your computer. Wait about one minute and then reboot. On some systems, the flash update will restart your computer automatically.
-
As your computer reboots, go immediately into the BIOS setup menu and look for an option to "Restore Defaults" or "Load Fail-Safe Defaults." This will be on the main page or the last page of a tabbed menu. Navigate using the arrow keys on your keyboard and follow all on-screen instructions. When finished, save your new settings and then exit BIOS. Your computer will load the operating system.
Disclaimer : We are not responsible if your tablet being error after update your BIOS although it’s a little risk. Please backup all your data and make sure your battery is full. All is your own risk.